Glossary
Allotropes
Some elements exist in several different structural forms, called allotropes. Each allotrope has different physical properties.
For more information on the Visual Elements image see the Uses and properties section below.
Glossary
Group
A vertical column in the periodic table. Members of a group typically have similar properties and electron configurations in their outer shell.
Period
A horizontal row in the periodic table. The atomic number of each element increases by one, reading from left to right.
Block
Elements are organised into blocks by the orbital type in which the outer electrons are found. These blocks are named for the characteristic spectra they produce: sharp (s), principal (p), diffuse (d), and fundamental (f).
Atomic number
The number of protons in an atom.
Electron configuration
The arrangements of electrons above the last (closed shell) noble gas.
Melting point
The temperature at which the solid–liquid phase change occurs.
Boiling point
The temperature at which the liquid–gas phase change occurs.
Sublimation
The transition of a substance directly from the solid to the gas phase without passing through a liquid phase.
Density (g cm−3)
Density is the mass of a substance that would fill 1 cm3 at room temperature.
Relative atomic mass
The mass of an atom relative to that of carbon-12. This is approximately the sum of the number of protons and neutrons in the nucleus. Where more than one isotope exists, the value given is the abundance weighted average.
Isotopes
Atoms of the same element with different numbers of neutrons.
CAS number
The Chemical Abstracts Service registry number is a unique identifier of a particular chemical, designed to prevent confusion arising from different languages and naming systems.
Group | Actinides | Melting point | 1527°C, 2781°F, 1800 K |
Period | 7 | Boiling point | Unknown |
Block | f | Density (g cm−3) | Unknown |
Atomic number | 100 | Relative atomic mass | [257] |
State at 20°C | Solid | Key isotopes | 257Fm |
Electron configuration | [Rn] 5f127s2 | CAS number | 7440-72-4 |
ChemSpider ID | 22434 | ChemSpider is a free chemical structure database |
Glossary
Image explanation
Murray Robertson is the artist behind the images which make up Visual Elements. This is where the artist explains his interpretation of the element and the science behind the picture.
Appearance
The description of the element in its natural form.
Biological role
The role of the element in humans, animals and plants.
Natural abundance
Where the element is most commonly found in nature, and how it is sourced commercially.
History
History
Atomic radius, non-bonded
Half of the distance between two unbonded atoms of the same element when the electrostatic forces are balanced. These values were determined using several different methods.
Covalent radius
Half of the distance between two atoms within a single covalent bond. Values are given for typical oxidation number and coordination.
Electron affinity
The energy released when an electron is added to the neutral atom and a negative ion is formed.
Electronegativity (Pauling scale)
The tendency of an atom to attract electrons towards itself, expressed on a relative scale.
First ionisation energy
The minimum energy required to remove an electron from a neutral atom in its ground state.
Glossary
Common oxidation states
The oxidation state of an atom is a measure of the degree of oxidation of an atom. It is defined as being the charge that an atom would have if all bonds were ionic. Uncombined elements have an oxidation state of 0. The sum of the oxidation states within a compound or ion must equal the overall charge.
Isotopes
Atoms of the same element with different numbers of neutrons.
Key for isotopes
Half life | ||
---|---|---|
y | years | |
d | days | |
h | hours | |
m | minutes | |
s | seconds | |
Mode of decay | ||
α | alpha particle emission | |
β | negative beta (electron) emission | |
β+ | positron emission | |
EC | orbital electron capture | |
sf | spontaneous fission | |
ββ | double beta emission | |
ECEC | double orbital electron capture |
Glossary
Data for this section been provided by the British Geological Survey.
Relative supply risk
An integrated supply risk index from 1 (very low risk) to 10 (very high risk). This is calculated by combining the scores for crustal abundance, reserve distribution, production concentration, substitutability, recycling rate and political stability scores.
Crustal abundance (ppm)
The number of atoms of the element per 1 million atoms of the Earth’s crust.
Recycling rate
The percentage of a commodity which is recycled. A higher recycling rate may reduce risk to supply.
Substitutability
The availability of suitable substitutes for a given commodity.
High = substitution not possible or very difficult.
Medium = substitution is possible but there may be an economic and/or performance impact
Low = substitution is possible with little or no economic and/or performance impact
Production concentration
The percentage of an element produced in the top producing country. The higher the value, the larger risk there is to supply.
Reserve distribution
The percentage of the world reserves located in the country with the largest reserves. The higher the value, the larger risk there is to supply.
Political stability of top producer
A percentile rank for the political stability of the top producing country, derived from World Bank governance indicators.
Political stability of top reserve holder
A percentile rank for the political stability of the country with the largest reserves, derived from World Bank governance indicators.
Glossary
Specific heat capacity (J kg−1 K−1)
Specific heat capacity is the amount of energy needed to change the temperature of a kilogram of a substance by 1 K.
Young's modulus
A measure of the stiffness of a substance. It provides a measure of how difficult it is to extend a material, with a value given by the ratio of tensile strength to tensile strain.
Shear modulus
A measure of how difficult it is to deform a material. It is given by the ratio of the shear stress to the shear strain.
Bulk modulus
A measure of how difficult it is to compress a substance. It is given by the ratio of the pressure on a body to the fractional decrease in volume.
Vapour pressure
A measure of the propensity of a substance to evaporate. It is defined as the equilibrium pressure exerted by the gas produced above a substance in a closed system.
Podcasts
Podcasts
Listen to Fermium Podcast |
Transcript :
Chemistry in its element: fermium(Promo) You're listening to Chemistry in its element brought to you by Chemistry World, the magazine of the Royal Society of Chemistry. (End promo) Meera Senthilingham This week, all rise for element 100. Here's Brian Clegg: Brian Clegg The number 100 is a very significant one for human beings. It's partly because our number system is based on ten - so ten tens seems to have a special significance. In years, it's around the maximum lifetime of a human being, making a century more than just a useful division in the historical timeline. But in the natural world, 100 isn't quite so important. There's nothing about being element 100 that makes fermium stand out - the periodic table doesn't attach any significance to base 10. But it's hard not to think that fermium must be special in some way. Like element 99 (einsteinium), fermium was first made in the hydrogen bomb test on Elugelab Island on the Eniwetok Atoll in the South Pacific. The test bomb exploded on the first of November 1952*, blasting vast quantities of material into the atmosphere that drifted down as fallout. The team from the University of Berkeley at California that tested tonnes of ash and coral debris found around 200 atoms of element 100. This had been created from uranium 238. Fusion in the hydrogen bomb was triggered by a conventional atomic bomb, and the remnants of that trigger's uranium fuel absorbed a swathe of neutrons, some of which then changed to protons as they underwent beta decay, finally producing fermium 255. The discoverers aptly named the element after Enrico Fermi, the Italian-born physicist whose work at the University of Chicago was crucial to the development of nuclear explosives. This work took place under the bleachers of a dusty, disused football stadium. The site hadn't been used for three years since the president of Chicago University closed down the football team as a distraction from academic work. In a claustrophobic space beneath the stands was an old squash court. Here, in 1942, Fermi and his team built the world's first manmade nuclear reactor, literally an atomic pile of carbon bricks where materials for the atomic bomb would be produced. Fermi, who won the Nobel Prize in 1938, also worked in quantum mechanics and particle physics, making him an ideal candidate for an elementary name. The element was almost named centurium, however. In 1953, scientists at the Nobel Institute in Stockholm had produced fermium 250 by bombarding uranium with oxygen nuclei. At the time, the discoveries from the hydrogen bomb were classified, so the Swedes, who tentatively came up with the centurium name for one hundred, could have got in first, had fermium not been rapidly de-classified. It might be no coincidence that the Berkeley team allowed the Nobel Institute's name nobelium for element 102 to continue to be used when the Swedes' claim for discovering that element proved dubious. There could have been a certain amount of guilt for sneaking in fermium under their noses. Fermium is an actinide, part of the floating bar of elements that is squeezed out from between actinium and lawrencium. Perhaps its greatest claim to fame on the periodic table is that it defines the start of the most obscure of the artificial elements - those above 100 are referred to as the transfermium elements. It is certainly the highest numbered element that has had a practical use identified. Although not yet deployed, fermium 255 is a strong alpha particle emitter with a half life - the time it takes half the material to undergo nuclear decay - of around 20 hours. In medical radioactive applications this is a good combination, where alpha sources are used in radiotherapy for cancer. This is a convenient half-life as it means the alpha particles - nuclei of helium atoms with two protons and two neutrons - are produced long enough for the source to be deployed, but the waste matter becomes a low level hazard very quickly. Fermium is usually produced using accelerators like cyclotrons now, although it has a special place in the periodic table as the highest numbered element that can be produced in a nuclear reactor, rather than by smashing atoms together in an accelerator. This is something of a useless capability, however. The fermium produced in reactors seems a good, useable product. It's fermium 257, which has a very practical half life of 100 days. But there's never a chance to use it. Inside a reactor there are plenty of loose neutrons floating about - this is how the chain reaction of the reactor works. Fermium 257 is great at absorbing neutrons and immediately become fermium 258. This has a tiny half life of less than a millisecond. So before you can get your hands on the fermium produced in a reactor it has disappeared. Like its transfermium colleagues, fermium has only been made in relatively tiny quantities. This means that no one has produced a big enough sample of fermium to be able to see it, though the expectation is that like other similar elements it would be a silvery-grey metal. Fermium has limited value, but anything numbered 100 inevitably feels a little special. And perhaps fermium is, at least when it's made in a nuclear reactor. You can see fermium as a sneaky element. As we've seen, this is a product that you can make, that should last 100 days before half of it has disappeared, yet in practice it vanishes after milliseconds. Perhaps what makes fermium special is that it's an element with a wicked sense of humour. Meera Senthilingham So the element that scientists are trying - and failing - to get their hands on. That was Brian Clegg, with the disappearing properties of fermium. Now next week, and element that we can see, and it's a lanthanide with a diverse range of applications. Simon Cotton Lutetium and its compounds have found some applications, the most important of these is the use of the oxide in making catalysts for cracking hydrocarbons in the petrochemical industry. But there are other more specialist uses, such as using the radioactive lutetium-177 isotope in cancer therapy. Lutetium ions were also used to dope gadolinium gallium garnet to make magnetic bubble computer memory that was eventually replaced by modern-day hard drives. Lutetium triflate has also been found to be a very effective recyclable catalyst for organic synthesis in aqueous systems - it avoids the use of organic solvents giving it green credentials. Meera Senthilingham And to find out the chemistry and properties of lutetium that make it so widely applicable, join Simon Cotton in next week's Chemistry in its element. until then, I'm Meera Senthilingham and thank you for listening. (Promo) Chemistry in its element is brought to you by the Royal Society of Chemistry and produced by thenakedscientists.com. There's more information and other episodes of Chemistry in its element on our website at chemistryworld.org/elements. (End promo) *The correct date is 1952, not 1942 as in the podcast audio file
|
Video
Video
Resources
Resources
Terms & Conditions
Images © Murray Robertson 1999-2011
Text © The Royal Society of Chemistry 1999-2011
Welcome to "A Visual Interpretation of The Table of Elements", the most striking version of the periodic table on the web. This Site has been carefully prepared for your visit, and we ask you to honour and agree to the following terms and conditions when using this Site.
Copyright of and ownership in the Images reside with Murray Robertson. The RSC has been granted the sole and exclusive right and licence to produce, publish and further license the Images.
The RSC maintains this Site for your information, education, communication, and personal entertainment. You may browse, download or print out one copy of the material displayed on the Site for your personal, non-commercial, non-public use, but you must retain all copyright and other proprietary notices contained on the materials. You may not further copy, alter, distribute or otherwise use any of the materials from this Site without the advance, written consent of the RSC. The images may not be posted on any website, shared in any disc library, image storage mechanism, network system or similar arrangement. Pornographic, defamatory, libellous, scandalous, fraudulent, immoral, infringing or otherwise unlawful use of the Images is, of course, prohibited.
If you wish to use the Images in a manner not permitted by these terms and conditions please contact the Publishing Services Department by email. If you are in any doubt, please ask.
Commercial use of the Images will be charged at a rate based on the particular use, prices on application. In such cases we would ask you to sign a Visual Elements licence agreement, tailored to the specific use you propose.
The RSC makes no representations whatsoever about the suitability of the information contained in the documents and related graphics published on this Site for any purpose. All such documents and related graphics are provided "as is" without any representation or endorsement made and warranty of any kind, whether expressed or implied, including but not limited to the implied warranties of fitness for a particular purpose, non-infringement, compatibility, security and accuracy.
In no event shall the RSC be liable for any damages including, without limitation, indirect or consequential damages, or any damages whatsoever arising from use or loss of use, data or profits, whether in action of contract, negligence or other tortious action, arising out of or in connection with the use of the material available from this Site. Nor shall the RSC be in any event liable for any damage to your computer equipment or software which may occur on account of your access to or use of the Site, or your downloading of materials, data, text, software, or images from the Site, whether caused by a virus, bug or otherwise.
We hope that you enjoy your visit to this Site. We welcome your feedback.
© Murray Robertson 1998-2017.
Data
W. M. Haynes, ed., CRC Handbook of Chemistry and Physics, CRC Press/Taylor and Francis, Boca Raton, FL, 95th Edition, Internet Version 2015, accessed December 2014.
Tables of Physical & Chemical Constants, Kaye & Laby Online, 16th edition, 1995. Version 1.0 (2005), accessed December 2014.
J. S. Coursey, D. J. Schwab, J. J. Tsai, and R. A. Dragoset, Atomic Weights and Isotopic Compositions (version 4.1), 2015, National Institute of Standards and Technology, Gaithersburg, MD, accessed November 2016.
T. L. Cottrell, The Strengths of Chemical Bonds, Butterworth, London, 1954.
Uses and properties
John Emsley, Nature’s Building Blocks: An A-Z Guide to the Elements, Oxford University Press, New York, 2nd Edition, 2011.
Thomas Jefferson National Accelerator Facility - Office of Science Education, It’s Elemental - The Periodic Table of Elements, accessed December 2014.
Periodic Table of Videos, accessed December 2014.
Supply risk data
Derived in part from material provided by the British Geological Survey © NERC.
History text
Elements 1-112, 114, 116 and 117 © John Emsley 2012. Elements 113, 115, 117 and 118 © Royal Society of Chemistry 2017.
Podcasts
Produced by The Naked Scientists.
Periodic Table of Videos
Created by video journalist Brady Haran working with chemists at The University of Nottingham.